How Much Does It Cost For The Top Part Of Beats To Be Repaired

If yous want to know how to repair Beats headphones quickly and without spending too much, this is the place for you lot.

Beats is a well-known make for a reason. The brand'south deep bass, remarkable mode, and celebrity endorsements helped Beats become ane of the elevation options for consumer-form headphones.

Yet, they aren't indestructible. Simply like any headphones, they can break if dropped, stepped on, or squashed. Unfortunately, accidents can happen even with the virtually conscientious owners.

Worse, finding assist can be difficult, especially since Apple tree support can take upward to ten days and require yous to spend more than. Considering how high these headphones are priced, who would want that, correct?

Balance easy, though, considering you lot've arrived at the right page. If yous're faced with the dilemma of broken Beats, here's a definite DIY repair guide for whatsoever hardware issues.

Repairing Beats Headphones: Should You DIY?

While the thought of repairing your own physically damaged Beats headphones may be exciting, you must be willing to take the risks information technology entails.

Beats headphones don't exactly come up inexpensive. And, repairing the headphones yourself, instead of relying on professionals, can practice more impairment than practiced.

So, before you go directly to repairing your beats, consider the following pros and cons:

What We Like

No lengthy repair waits.
Cheaper.
Cocky-satisfaction.
Do it all at habitation!
Some DIY repairs are authorized.

What We Don't Like

Can be time consuming.
Might need to buy specialty tools.
Tin can possibly damage your headphones.
Unauthorized repairs risk voiding your warranty.

Sending your Beats to a technician who knows how to repair Beats headphones tin take weeks. But, at least you're certain that your treasured Beats are in good hands, and it won't void whatsoever occurring warranties.

Just not anybody has the time (and money) to spend on those repairs. Non to mention, physical labor with your hands is found to reduce rates of depression. So it could be tempting to endeavor it yourself.

In fact, even Apple tree encourages DIY repairs. Depending on the situation and your warranty coverage, you can be entitled to Apple'due south DIY parts service. Here, Apple volition send you the needed headphone parts to repair your Beats in exchange for the lacking ones.

Not all physical damages are covered by this DIY parts service, though. That's why it's always advisable to cheque your warranty coverage before doing whatever DIY repairs.

Don't take the determination to void the terms of your warranty lightly. Make sure to bank check your coverage and utilize them every bit much as possible. Remember: One time your warranty is voided, there's no going back.

How to Repair Beats Headband

The headband is the backbone of your headphones. But they're also one of the most fragile parts, especially if your Beats headphones get dropped or smashed in your purse. This is because Beats' headbands are usually made from plastic to keep the overall headphones' weight lighter, instead of more durable materials like steel.

Here is how to repair your Beats headphones' headbands:

Here's exactly what torx screwdriver heads should look like. (From: Pixabayl) — Here's exactly what torx screwdriver heads should look similar. (From: Pixabay)

This repair volition crave a special type of screwdriver – a torx. The head of these screwdrivers look like a half-dozen-pointed star.

Tools you'll need:

Torx screwdriver
Needle-nose pliers
Replacement headband

Unplug the headphones from any audio jacks or chargers.

Unplugging headphones (From: Youtube/TechScrew)
Using the torx screwdriver, remove the four screws on the sides of the headband. And so, detach the minor plastic part the screws were holding in.

Remove the four screws on the sides of the headband (From: Youtube/Techscrew)
Pull off the headband cushion and H-shaped hinge-protector.

Remove the headband absorber (From: Youtube/Techscrew)
Advisedly snap off the one-time headband and remove the hinge pins with your needle nose pliers. Be conscientious not to damage the wire the connects the earcups.

Remove the four swivel pins using needle-nosed pliers. (From: Youtube/Techscrew)
Put the new headband slice and reinsert the hinge pins.

Reinserting hinge pins to new headband (From: Youtube/Techscrew)
Insert the wire that connects the headphone cups through the groove in the top.

Insert the wire into the groove at the meridian. (From: Youtube/Techscrew)
Replace the hinge protectors and cushion. And then, supercede the small headband piece with the Beats logo and y'all're all done!

Replace swivel protectors and absorber on Beats headband (From: Youtube/Techscrew)

Check out the demonstration video for more insights!

How to Change Beats Headphones' Batteries

Fifty-fifty when you're conscientious and follow all rules, Beats batteries, similar all rechargeables, will somewhen wear out. They either won't accuse anymore, or run out of ability too quickly. Without getting likewise complex, this normally results from cathode decay in the battery.

Rechargeable battery decay isn't preventable, but you tin prolong their life. Tips include ever charging at room temperature and having a charging schedule.

Each stride in how to repair Beats headphones' batteries will depend on the Beats headphones' model. For this, our detailed Beats bombardment-changing guide will help. Only equally a sample, follow forth below for a brief guide on the Beats Studio 2:

Tools needed:

Prying tool
Pocket-sized screwdriver
New battery

Use the prying tool to remove the outside center cap on the right ear loving cup.

Pry open the outer cap. (From: Youtube/Joe's Gaming & Electronics)
Unscrew the ear cup from the base.

Unscrewing the ear cup to go to the speaker. (From: Youtube/Joe's Gaming & Electronics)
Remove the "R" tab. Then, pull autonomously the plastic housing.

Removing the "R" tab. (From: Youtube/Joe's Gaming & Electronics)
Disconnect the bombardment cable from the mainboard.

Disconnecting the battery. (From: YouTube/Joe'south Gaming & Electronics)
Employ the prying tool to remove the old bombardment.

Pry up the one-time bombardment from the adhesive. (From: YouTube/Joe's Gaming & Electronics)
Supercede it with the new battery.

Replacing Beats headphones battery (From: YouTube/Joe's Gaming & Electronics)
Reassemble the headphones in the reverse order that you took them apart.

Bank check out the video guide for more details. Remember to check out our in-depth guide for other Beats styles.

How to Repair Beats Headphones' Speakers

If the headband is the backbone of your headphones, and then the speakers are the soul. If this part has problems, y'all may be tempted to simply throw your headphones out. Besides, they just won't audio every bit practiced as they should.

But, like any other role, they are also replaceable.

However, your Beats headphone speakers are usually surrounded by other electronics. That's why knowing how to take autonomously your speakers without damaging them is disquisitional.

Remember that opening your Beats headphones will void the warranty. Before proceeding, make certain to bank check if your warranty is still valid and run across if you tin apply that instead.

Tools needed:

Prying tool
Small screwdriver
Soldering gun, solder, and flux.

Remove the padding on the damaged side.

Removing Beats headphone padding (From: Youtube/Joe's Gaming & Electronics)
Unscrew the speaker housing.

Taking apart ear cup (From: Youtube/Joe'south Gaming & Electronics)
Unsnap whatsoever wires in charge ports.

Take off the snap-on accuse port. (From: Youtube/Joe's Gaming & Electronics)
Unsolder the speaker wires.

Removing speaker wires (From: Youtube/Joe'south Gaming & Electronics)
Briefly estrus the charger port to remove it. Then, remove the pocket-size condom ring from the MS port.

Remove the small condom ring from the speaker. (From: Youtube/Joe's Gaming & Electronics)
Solder on the new speaker's wires.

Placing the new Beats headphone speakers (From: Youtube/Joe'due south Gaming & Electronics)
Snap back the charger port in. This doesn't need to be glued down.

Putting dorsum the charger port (From: Youtube/Joe's Gaming & Electronics)
Put the small safe ring on MS port and snap information technology in.

Placing the rubber rings back (From: Youtube/Joe'due south Gaming & Electronics)
Spiral the new speaker's housing on and place dorsum the padding, and you're washed!

Screwing back the speaker housing (From: Youtube/Joe'south Gaming & Electronics)

Remember that speakers have magnets. Don't put the small screws most the speakers or you will run a risk damaging them, or losing your screws.

For a video tutorial, this audio-visual guide will besides walk you through every step of the process.

How to Repair Your Broken Beats Headphone Plugs

People have been saying the headphone jack will go extinct for years now. However, despite the infiltration of Bluetooth headphones, USB-C, and lightning ports, the 3.5mm standard prevails for and so many uses. And with jacks and plugs come up frayed wires.

Luckily, frayed wires can be fixed. In fact, our standard headphone wire repair guide will mostly encompass what you need to know.

But, for an in-depth guide for how to repair your Beats' jack, carry on:

This guide assumes you have in-depth soldering knowledge and skills. There is a wonderful soldering guide over at Techspray if you need to castor upwards on your skills before y'all begin!

Tools needed:

Solder gun, solder, and flux
Scissors
A new AUX jack
Tweezers
Heat Gun
Blue Loctite
2P-10
Estrus compress tube

Cutting off the damaged AUX cable, leaving every bit much wire remaining as possible.

Cut the damaged AUX cable as near to the base as possible. (From: Youtube/Joe'south Gaming & Electronics)
Advisedly remove the outer layer of the cord (about ¾'s of an inch should practise) to reveal the wires inside.

Remove outside layer of the cord (From: Youtube/Joe's Gaming & Electronics)
Separate out the aureate, scarlet, and dark-green wires and twist them per color. You lot can cutting downwards the insulation and extra wires to save room.
At this point you should accept 4 bundles of wires: Red (left speaker), greenish (right speaker), ruddy and green (mic), and gold (grounding).

Segregate the wires (From: Youtube/Joe'southward Gaming & Electronics)
Slide the wires through the end piece of the new headphone plug.

Put twisted wires inside the new plug (From: Youtube/Joe's Gaming & Electronics)
Cut the articulate compress tube in half. Then, slide the cable through the compress tube. Information technology should rest on the cease piece of the new AUX port.

Cutting the oestrus shrink tube (From: Youtube/Joe's Gaming & Electronics)
Put your flux on the ends of each wire bundle and solder each wire tip.

Applying flux at the end of each wire (From: Youtube/Joe'southward Gaming & Electronics)
Apply flux and solder onto each of the points of the wire-receiving finish of the new AUX port. Brand sure the points don't impact. Solder on the wires in the order listed in the diagram below:

Wire soldering guide (From: Youtube/Joe's Gaming & Electronics)
Examination your speakers (and mic) to make sure they work. Once that's okay, carefully slide apply heat with the heat gun or hair dryer to secure the oestrus shrink tube.

Securing the heat shrink tube (From: Youtube/Joe'south Gaming & Electronics)
Slide the back up and seal with bluish loctite mucilage, twisting firmly into place. Add 2P-ten on the cable side of the back, every bit shown below:

Adding the 2P-x (From: Youtube/Joe's Gaming & Electronics)
Spray TP-x activator on the region.

Spraying the TP-10 (From: Youtube/Joe'due south Gaming & Electronics)
Let all chemicals dry before using the headphones.

This fix could accept a long time, from one to 2 hours depending on your soldering skill. Since this is a bit technical, you can too visit this video for a visual step-past-step guide. In one case you've done it once or twice, it will get much easier.

How to Replace Your Beats Headphone Pads

Equally nice as Beats headphones are, the pads are prone to getting worn out, or worse, rotten.

Luckily, replacing Beats headphone pads is quite a bit easier than what we just did in the previous section. Please refer to our headphone pad replacement guide for extra tips.

Tools needed:

Replacement pads
Earpad tape
Prying tool
One-time toothbrush

Gently insert the prying tool in between the speaker housing and the ear pad of the pad to be replaced.

Insert your prying tool in the space between the pad and the base of the headset advisedly.
Showtime prying away at one department. Slowly work your way around the pad until information technology loosens plenty to come off.
Utilise the toothbrush to advisedly scrub off any old dirt, glue, dust, etc. on the driver.
Utilise earpad tape to the replacement headphone pad. Brand sure the holes line upwards properly.
After the tape is fit snugly to the pad, remove the record encompass.
Carefully orient the earpad and attach information technology to the headset where the sometime i was removed. Brand certain to press and hold the earpad to the headset for a few seconds or until a secure bond is formed.

How to Repair Beats Headphones via Apple tree Support

If doing the repairs yourself feels daunting afterward yous've read the instructions above, you lot may desire to just consult Apple tree Support instead.

You lot may feel that if yous are using Apple Support, then yous're not going to have to do a lot. While true, it is best to be fully informed before spending your hard-earned cash for repairs.

For that, here are some things you should know:

How to make a service request

Earlier making a service request, you'll likely want to know if your Beats qualify.

Older Beats are divided into two categories, "vintage" and "obsolete."

"Vintage" products are those that are at to the lowest degree five years quondam and less than 7 years former. In that location may exist some limited aid bachelor.

"Obsolete" products include all Monster-branded Beats and any Beats 7 years former or older. No hardware service is available for 'Obsolete' Beats.

Even if your product is considered 'obsolete' at that place is still a gamble Apple Support people might be in the know of some specialty fixes. If yous accept the time, there's no shame in giving them a call.

Once you've decided your products tin still be serviced, follow the instructions below:

Go to https://getsupport.apple.com/
Select 'Service Request'

Select 'Service Request' from the menu.
Choose 'Chat to Accommodate a Repair' to adapt your repair via chat box or 'Call to Arrange a Repair' to get in line for a live call.

Choose either 'Conversation' or 'Call' to proceed.
Fill out your name and e-mail address (plus telephone number, if yous opted for a phone call) to begin support.

Boosted costs and time needed

Of course, with convenience comes a toll. And, for this, it involves your time and coin.. While the whole process can be a bit complex, hither's everything you need to know from the Beats repair website:

Fourth dimension:
- Approximately 3-10 days later on you send in your Beats.
- Local Apple authorized service providers may have dissimilar return times.
Cost
- Will be confirmed with you afterwards your Beats are examined past the technician.
- The detailed repair pricing listing can also help you!

Decision

The final wire is soldered. Your feet are kicked upwardly. The comfiest earpads to grace this Globe are resting on your ears.

Finally, you get to savor the freshest hip-hop beats without spending a lot. Hopefully, this article helped y'all become to that indicate!

So, what stock-still your Beats by Dre? Did y'all burn a finger while soldering? Ouch, we hope not! In any event, please leave a comment below and tell us about your experiences.